The fast boiler

1 Ton Gas Boiler Kazakhstan

Time : 2021-10-09
The price of Kazakhstan 1 Ton Gas Boiler is about $1,000-$9,000. The fuel of the gas boiler can use natural gas, biogas, liquid propane gas, diesel, heavy oil, light oil, crude oil and other fuels. The rated pressure can reach 1.0Mpa (10bar). The main application industries are pharmaceuticals, papermaking, tobacco, printing and dyeing. , Clothing and other industries.


Fangkuai WNS series oil/gas boiler adopts horizontal three-pass wet-back structure, large-scale corrugated furnace and patented threaded tube technology, equipped with world-class brand burners and valve groups, and independently develops a highly matched PLC control system to achieve multiple linkages. After the fuel is atomized by the burner, the flame fills the wave furnace and transfers heat through the furnace wall. This is the first path; the high-temperature flue gas is collected in the reversing chamber, and then enters the second channel, which is the grooved tube bundle area; after heat convection , The temperature gradually drops, enters the front smoke box, turns to the third channel, that is, the smooth tube bundle area, and then enters the chimney through the rear smoke box and exhausts to the atmosphere.

Advantages of Fangkuai gas boiler:

1. Cutting, rolling, drilling and other key parts adopt advanced CNC processing technology to reduce assembly stress and prolong the service life of the boiler.

2. Both front and rear smoke chamber panels are cut by CNC plasma cutting machine, neat and beautiful.

3. Easy to operate and maintain, automatic operation, automatic adjustment and protection of combustion, water level, temperature, and steam pressure.

4. Expand the pipe at the junction of the smoke pipe and the tube plate to eliminate the gap, and then use automatic argon arc welding to release the stress and prolong the service life of the boiler.

5. Using high-quality aluminum silicate fiber and refractory clay for heat preservation, the temperature of the pot body is controlled below 45°C to control the heat loss.

6. Sufficient steam storage room and heating area enable the boiler to produce high-quality steam and high heating power. The addition of a condenser can reuse the exhaust heat, increase the inlet water temperature and reduce the discharge temperature, which can increase the thermal efficiency by more than 98% and save operating costs.

Therefore, if you have boiler needs, it is better to carefully select the boiler manufacturer. Fangkuai Boiler has A-level boiler manufacturing qualification and first-level boiler installation qualification. It has focused on the research and development of steam boilers, coal-fired boilers, biomass boilers, oil-fired boilers and other boilers for more than 20 years. The boilers of large factories are guaranteed and the price is low. , Such as common biomass boilers, oil-fired boilers and other quotations, the factory sends directly with high quality and low price. The thermal efficiency is high, and the heating area is larger than that of general boiler manufacturers. Some common boiler problems can be avoided, and the cost of gas boilers is reduced, corresponding to the increase in the cost-effectiveness of boilers.
Hot products
Full premixed condensing steam boiler

Full premixed condensing steam boiler

See more

Capacity: 1-20 t/h

Rated thermal efficiency: 100-104%

Rated working pressure: ≤1.6Mpa

Applicable fuel: Natural gas etc.

WNS integrated condensing steam boiler

WNS integrated condensing steam boiler

See more

Capacity: 1-20 t/h

Rated thermal efficiency: 100-104%

Rated working pressure: ≤3.82Mpa

Applicable fuel: Natural gas, heavy oil, etc

WNS split type condensing steam boiler

WNS split type condensing steam boiler

See more

Capacity: 1-20 t/h

Rated thermal efficiency: 97-100%

Rated working pressure: ≤3.82Mpa

Applicable fuel: Natural gas, diesel oil, etc